Image Access WideTEK 48, Setup Manual

Page: 49 / 155

/
Setup Manual Page 49
D.4 Time and Date
Picture 40: Time and date
To change time or date value, touch the value in the respective line.
Touch the line at the desired position to move the “cursor”.
To delete a digit, place the cursor at the right side of the digit and press the “ <= ” button.
The digits will always be deleted from right to left.
Use the numeric keypad in order to enter digits.
Selecting the time zone
By changing the time zone, the time that appears on the touchscreen is quickly adapted to
the location of the scanner.
Touch the selecting arrow. A list with the available values opens.
Tap at the desired time zone. The zone will be set and the list closes.
Store time and date: Saves the modified values when pressed.
Reset time and date: Sets the values to default values when pressed.