/
Setup Manual
Page 35
Place an upper longitudinal foot on a vertical leg. The oval cut-out must face to the inner
side.
Picture 21: Upper longitudinal foot on vertical leg
Insert the second crossbeam between the vertical legs.
Picture 22: Upper crossbeam inserted
Assemble the upper crossbeam, the upper longitudinal foot and the vertical leg on one
side with two ISO 4016 – M8x50x22-WS screws and washers at each screw.
Tighten the screws with the combination wrench, size 13.
Summary of Contents for WideTEK 48
Page 1: ...Setup Manual ...
Page 2: ...File WT36 48 600_SetupManual_D docx ...
Page 17: ... Setup Manual Page 17 ...