Image Access Wide Tek WT 36C Setup Manual Download Page 53

Page: 53 / 121

Setup Manual

Page 53

D.6.3

Preset Selection – Delete Preset

All presets can be deleted except the pre-installed presets

Easy

and

Expert

Select the preset to be deleted from the list.

Touch the

Delete Preset

button. The preset will be deleted.

The list of presets will not automatically refresh.

To refresh the list, return to the kiosk application (see D.6.5) and open the setup menu
again.

D.6.4

GUI Selection – Delete GUI

All applications can be deleted except the pre-installed application

EasyScan

Select the application to be deleted from the list.

Touch the

Delete GUI

button. The application will be deleted.

The list of applications will not automatically refresh.

To refresh the list, return to the kiosk application (press the

Home

button) and open the

setup menu again.

D.6.5

Back to the Kiosk Application

Touch the

Home

button.

The touchscreen returns to the kiosk application.

Summary of Contents for Wide Tek WT 36C


























































































































Search results

Summary of Contents for Wide Tek WT 36C

Reviews:

Related manuals for Wide Tek WT 36C

Brands by name

Popular brands

Image Access Wide Tek WT 36C, Setup Manual

Search results

Summary of Contents for Wide Tek WT 36C

Reviews:

Related manuals for Wide Tek WT 36C

Brands by name

Popular brands