Page 24
Setup Manual
B.5 Connectors
Please note:
The definition of “left” and “right” are seen from the back side of the
scanner.
B.5.1
Back Side Overview
Both scanner models are equipped with the main switch at the back side and with
connectors for:
•
External power supply
•
Network cable
•
Video signal
•
Foot pedal switch
•
Recovery key
Differences only exist at the left side in position and type of the video connector.
Picture 11: Back of WideTEK 36C
Note: Picture 11 shows an earlier version of the
Wide
TEK
®
36C
back side.
B.5.2
Connector at the right back side
Picture 12: Recovery Key connector, covered with plastic cap
On the scanner's right back side find the Recovery key connector.
To protect the sensible pins of the connector, it is covered with a cap.
Remove the cap before connecting the Recovery key to the scanner.
Note:
The recovery function should only be activated by an administrator!
Cover the connector again after removing the Recovery key.
Summary of Contents for Wide Tek WT 36C
Page 1: ...Setup Manual...
