Setup Manual
Page 117
E.7.5
Lock Web App
This function locks the Scan2Net user interface.
When the Scan2Net user interface is locked, the scanner can only be controlled by the
touchscreen or by external software.
Picture 114: Enter password to lock the Scan2Net user interface
New Password
Enter the new password.
Retype New Password
Type the new password again.
Note:
The system checks the syntax (upper and lower case) of the password.
Clear Fields
Clears the fields where the password can be entered.
Apply
Sends the new password to the scanner.
E.7.6
Unlock Web App
This function unlocks the Scan2Net user interface.
Enter the password that has been used to lock the user interface.
Summary of Contents for Wide Tek WT 36C
Page 1: ...Setup Manual...
