14.2.1 Auto
Focus
This function automatically finds the focus point for the highest sharpness and best image
quality.
1. Press the "Auto Focus" button.
2. Place the “Line Reference Sheet S2N LRS-200”, which comes with the scanner, or a
highly detailed document (small, fine print) on the scanner as shown on the screen.
3. Press the "Next Step" button. Some measurements will be executed.
4. After the “Auto Focus” function is finished the results will be displayed.
5. Click in section “Controls” the button “New Values” to repeat the measurement.
Or
6. Click in section “Menu Controls” the button “Back to Adj. Menu” to return to the
adjustments menu (see Picture 55).
14.2.2 X-Adjust
This function adjusts the horizontal middle of the S2N Scan2Net scanner's scan area.
1. Press the "X-Adjust" button.
2. Remove all documents from the scanner's glass plate.
3. Press the "Next Step" button.
4. After the “X-Adjust” function is finished the results will be displayed.
5. Click in section “Controls” the button “New Values” to repeat the measurement.
Or
6. Click in section “Menu Controls” the button “Back to Adj. Menu” to return to the
adjustments menu (see Picture 55).
Operation Manual
Page 67
