7.2 TYPE
Picture 8: Function field TYPE
The function field TYPE defines the document type.
At the end of the system-test the
field lights up.
Function Document
type
FLAT
Documents with consistent thickness, e.g. single pages.
Documents without binding or center fold.
BOOK
Documents with a high center fold, e.g. books, catalogues or similar
things.
FOLDER
Documents with distinct differences in level, e.g. opened files.
AUTO
No function at this time.
7.2.1 FLAT
The type FLAT is suitable for all documents with a slight difference or no difference in
thickness level over the whole document.
If the type FLAT is selected, the focus value is measured in a narrow range to the left,
next to the center line of the document bed. The distance to the center line results from
the size of the document to be scanned. Place the document at the edge of the document
bed and with at least a third of the document size left from the center line.
With the setting PAGES RIGHT, the focus value is measured right from the center line.
In this case, place the document so that at least a third of the document size is right of the
center line.
The distance between the measurement area and the center line depends on the selected
format. The smaller the selected format is, the closer the measuring area is to the center
line.
Page 22
Operation Manual
