background image

WA R R A N T Y

03_14

OMH-6722B

 xiii

 

 

Comments, Suggestions, and Problems

To ensure that you get the most out of your ILX Lightwave product, we ask that 
you direct any product operation or service related questions or comments to ILX 
Lightwave Customer Support. You may contact us in whatever way is most 
convenient:

Phone   . . . . . . . . . . . . . . . . . . . . . . . . . . .  (800) 459-9459 or (406) 586-1244

Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  (406) 586-9405

On the web at:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ilx.custhelp.com

Or mail to:

ILX Lightwave Corporation
P. O. Box 6310
Bozeman, Montana, U.S.A 59771
www.ilxlightwave.com

When you contact us, please have the following information:

If ILX Lightwave determines that a return to the factory is necessary, you are 
issued a Return Authorization (RA) number. Please mark this number on the 
outside of the shipping box.

You or your shipping service are responsible for any shipping damage when 
returning the instrument to ILX Lightwave; ILX recommends you insure the 
shipment. If the original shipping container is not available, place your instrument 

Model Number:

Serial Number:

End-user Name:

Company:

Phone:

Fax:

Description of what is

connected to the ILX

Lightwave instrument:

Description of the problem:

StockCheck.com

Downloaded from StockCheck.com

Summary of Contents for OMH-6722B





































Reviews: