Operation
6.4.5
Menu item: „Factory settings“
Designation
ILMVAC-Control
Control
panel
Explanation
current sensor 0...20 / 4...20 mA
sensor input
Not
settable
voltage sensor 0.5...4.5V
high active
(1 active)
Default setting: high, economic setting: low
For motor control via SBS.
motor polarity
Not
settable
low active
(0 active)
Default setting: high, economic setting: low
For motor control via SBS.
x = present (Two-point control)
vacuum valve
Not
settable
= not present (Two-point control)
x = permitted
calibration allowed
Not
settable
= not permitted
1 ON/OFF - manual pressure setting
2 ON/OFF - manual pressure setting with additional pressure
drop
5 ON/OFF - autonomous pressure determination
visible menu points
Not
settable
6 ON/OFF - autonomous pressure determination with
additional pressure drop
Displays the active operating elements
1 = without external operating device
Display address
Not
settable
2 = with external operating device
read
Not
settable
Reading the set values
Confirmation of acceptance by signal tone
send
Not
settable
Transmission of changed values to the controller
Confirmation of acceptance by signal tone
30 113184
