ILLUMINATI MAGIC Unifi Dice, User Manual

Page: 15 / 28

Page 15
Adjusting Vibrator Settings
The Thumper has an integrated vibrator that discreetly communicates signals to the
performer. The Unifi devices transmit their signals multiple times, just in case there is
interference that prevents the Thumper from receiving the message.
Every event is uniquely coded, which prevents duplicate signals from being processed by
the Thumper.
Enable Vibrator
The Enable Vibrator option will enable or disable the onboard vibrator on the Thumper.
Even with the vibrator disabled, the Thumper will continue to process events from Unifi
devices, but will not vibrate to indicate the result.
If you are utilizing the Unifi App or the Apple Watch to notify you as to the status of the
events, then you may wish to disable the vibrator.
Number of Vibration Repeats
The Thumper may be programmed to repeat the vibrate sequences up to four additional
times plus the original notification (i.e., a total of five vibrate sequences).
The Thumper will only vibrate the most recent event. For example, if the dice has rolled a
three and the number of repeats is four (at 15-second intervals), then this will take 60
seconds. If the dice is rolled again within this time, then the latest result is vibrated, and
the repeat sequence starts again.