3
Select Save.
Enable Audio Indicators
1
From the Manage Instrument screen, select System Customization.
2
Select the Play audio checkbox to turn on audio indicators for the following events.
u
Upon instrument initialization
u
When a run is started
u
When errors occur
u
When user interaction is required
u
When a run has finished
3
Select Save.
Enable Demo Mode
Demo Mode simulates a sequencing run to provide a demonstration of instrument features and function. Use
Demo Mode to mimic run setup without reagents, a flow cell, or other consumables.
1
From the Manage Instrument screen, select System Customization.
2
Select the Enable Demo Mode checkbox.
3
Select Save.
4
[Optional]
Enter a 4-digit PIN.
When this field is blank, exiting Demo Mode does not require a PIN.
5
Select OK to restart the software in Demo Mode.
After restart, the MiniSeq Control Software banner reads Demonstration Only.
Exit Demo Mode
1
From the Manage Instrument screen, select System Customization.
2
Clear the Enable Demo Mode checkbox.
3
Select Save.
4
If a PIN is required, enter it when prompted.
5
Select OK to restart the software in the standard mode.
Configure Analysis Settings
The control software provides the following options for data transfer and subsequent analysis:
u
BaseSpace—Sends data to Illumina BaseSpace for analysis on BaseSpace.
u
BaseSpace Onsite—Sends data to the BaseSpace Onsite LT server for analysis on the server.
u
Local Run Manager—Sends data to a specified output folder location for analysis using a Local Run
Manager module.
u
Standalone—Saves data to a specified output folder location for later analysis.
Select BaseSpace
1
From the Manage Instrument screen, select System Configuration.
Document # 1000000002695 v02 Material # 20014309
For Research Use Only. Not for use in diagnostic procedures.
10
MiniSeq System Guide