illumina 20040482 Operating Manual Download Page 29

Page: 29 / 124

3 - Technical Data

Introduction

Infinium LiHa and Infinium RoMa Operating Manual - Document # 1000000110155 v00

3 - 1

3 Technical Data

Purpose of This

Chapter

This chapter introduces the reader to the Infinium LiHa and Infinium RoMa and its

main components. It contains technical data, requirements and performance data.

3.1 Introduction

What is

Infinium LiHa

and Infinium

RoMa?

The Infinium LiHa and Infinium RoMa is a precision instrument designed for

automating specific steps in the Illumina Infinium Array Workflow. The Infinium

LiHa and Infinium RoMa is an open and flexible platform.

Delivery

The Infinium LiHa and Infinium RoMa is delivered only to Illumina authorized field

service engineers, who take responsibility for assessing and investigating each

installation at an end-user site to comply with local requirements.

3.1.1 Infinium LiHa and Infinium RoMa

Overview

Fig. 3-1

Instrument overview

Summary of Contents for 20040482




























































































































Search results

Summary of Contents for 20040482

Reviews:

illumina 20040482, Operating Manual, Page: 29 / 124

Search results

Summary of Contents for 20040482

Reviews: