background image

3

Important Safety Instructions

•  Read these Instructions.
•  Keep these Instructions.
•  Heed all Warnings.
•  Follow all instructions.
•  Do not use this apparatus near water.
•  Clean only with a dry cloth.
•  Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

•  Do not install near any heat Function swtich s such as 

radiators, heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat.

•  Do not defeat the safety purpose of the polarized or 

grounding - type plug. A polarized plug has two blades with 

one wider than the other. A grounding type plug has two 

blades and a third grounding prong. The wide blade or the 

third prong are provided for your safety. When the provided 

plug does not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet.

•  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 

where they exit from the apparatus.

•  Only use attachments/accessories specified by the 

manufacturer. 

•  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

•  Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in any 

way, such as power-supply cord or plug is damaged, liquid 

has been spilled or objects have fallen into the apparatus, 

the apparatus has been exposed to rain or moisture, does not 

operate normally, or has been dropped.

•  Use only with a cart, stand, tripod, bracket, 

or table specified by the manufacturer, or 

sold with the apparatus. When a cart is used, 

use caution when moving the cart/apparatus 

combination to avoid injury from tip-over.

FCC Warnings 

Warning: Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to Part 

15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference 

by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician 

for help.

Additional Warnings and Precautions

•  CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH 

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY 

INSERT.

•  Mains plug is used as disconnect device and it should remain 

readily operable during intended use. In order to disconnect 

the apparatus from the mains completely, the mains plug 

should be disconnected from the mains socket outlet 

completely. 

• 

CAUTION

: Use of controls or adjustments or performance 

of procedures other than those specified may result in 

hazardous radiation exposure.

•  WARNING: Changes or modifications to this unit not 

expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

•  WARNING: Use of this unit near fluorescent lighting may 

cause interference regarding use of the remote. If the unit is 

displaying erratic behavior move away from any fluorescent 

lighting, as it may be the cause.

•  WARNING: Shock hazard - Do Not Open.
•  Caution and marking information is located at the rear or 

bottom of the apparatus.

•  WARNING: To reduce the risk of fire or electric shock, 

do not expose this apparatus to rain, moisture, dripping, or 

splashing.

•  Objects filled with liquids, such as vases, shall not be placed 

on the apparatus.

•  WARNING: This product may contain chemicals known 

to the State of California to cause birth defects, or other 

reproductive harm (California Prop 65). Wash hands after 

handling.

•  This product meets and complies with all Federal regulations.

Summary of Contents for ITTB757











Reviews: