iLive | ITB382
Quickstart Guide
For FAQ, visit the support section at www.ilive.net or call customer support at: 1-888-999-4215
Introduction-
Power & Input Modes
Using the ITB382 Sound Bar
Connectivity-
Bluetooth
Connecting your sound bar wirelessly using Bluetooth
Status
Indicator
Power Off
No Light
Optical Mode
Amber Light
Aux In Mode
White light
Line In Mode
White Light
Radio Mode
Green Light
Bluetooth Ready
Flashing Blue Light
Bluetooth Connected
Blue Light
1. Power on the unit by pressing the
Power
button.
2. Press the
Source
button repeatedly to enter Bluetooth mode, indicated by a blue light.
3. Press the
Pairing
button on the side of the unit. The
Pairing Indicator
will flash blue quickly.
When pairing, remain within 3 feet of the unit.
4. Using the native controls on your Bluetooth device, select the “ITB382” in your Bluetooth settings
to pair.
If your device requests a password, enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth
devices.
5. When successfully paired and connected, a beep will issue from the unit and the
Pairing Indicator
will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the device.
If your device should become unpaired or you find it is unable to connect, repeat the above steps.
ITB382B-573-02-QS.indd 1
3/20/2013 3:13:45 PM
