Congratulations on your purchase of an Ikelite Digital Camera
Housing. Ikelite has over 30 years of experience in the underwater
photographic and lighting market. Our products are designed and
built in the USA by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
This housing has been water pressure tested at the factory.
Housing is pressure tested to 125’ (38m).
Ikelite Digital Housing
i n s t r u c t i o n m a n u a l
#6138 for Olympus D-230
2
Shutter Release
Shutter Lock
Lens Port
Housing
Latch
Lock
Accessory
Shoe
Locking Latch
Accessory Shoe
Shutter Button
Thumb Rest
Tray Mounting Shoes
Latch
Monitor
OK
Arrow Pad
H
Hoouussiinngg FFrroonntt
H
Hoouussiinngg BBaacckk
3
Lock
Push back on
Lock and Rotate
the Latch open
Hinge
O
Oppeenniinngg tthhee H
Hoouussiinngg
Push back on the lock and lift the latch. Unhook the latch from the
front of the housing. The two halves of the housing will now swing
open.
O
Oppeenniinngg tthhee H
Hoouussiinngg
Hook
Latch
Hinge
4
Shutter
Release Arm
Foam Spacer
Foam Spacer
Camera
IInnssttaalllliinngg tthhee CCaam
meerraa
Slide the camera’s Lens Barrier OPEN, this turns the camera ON.
N
NO
OTTEE::
There is no provision in the housing for sliding the Lens
Barrier once the camera is in the housing.
With the housing face down place the right edge of the camera
into the housing as far forward as possible and against the foam
spacer on the right. Gently push the left edge of the camera into
the housing with the base of the camera against the bottom of the
housing. The top foam spacer and the front rubber spacers hold the
camera in position.
IInnssttaalllliinngg tthhee CCaam
meerraa
