Congratulations on your purchase of an Ikelite Digital Camera
Housing. Ikelite has over 45 years of experience in the underwater
photographic and lighting market. Our products are designed and
built in the USA by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for
stability. This housing has been water pressure tested at the
factory. Housing is pressure tested to 200’ (60m).
Ikelite SLR-DC Housing
i n s t r u c t i o n
m a n u a l
#6853.30 for Olympus E-330
IKELITE
2
Strobe
Mount
Rubber
Handle
Quick-Release
Strobe
Mount
Gear Sleeve
Drive Gear
Zoom
Control
Lid Snap
Lens
Release
Exposure
On/Off
Lid
Snap
Shutter
Release
Port Lock
Aluminum Tray
Port
Opening
Mode Dial
Lid
Snap
Quick
Release
Button
External Strobe Connector
and Waterproof Cap
Viewfinder Port
[D] Info
[E] A/B
[F] Live View
[G] AEL/AFL
[H] Drive/Copy/Print
[I] WB
A
B
C
D
E F
G
H
I
K
L
J
Lens
Release
Zoom
Control Dial
Mode Dial
[A] Playback
[B] Erase
[C] Menu
[J] Metering
[K] ISO
[L] AF
[M] OK
[N] Mode/Compensation
M
N
FRONT VIEW
BACK VIEW
3
SIDE VIEW
Camera
Tray
Camera
Mounting
Bolt
Gear
Sleeve
Port
O'ring
Optional
Port
Lid
Snap
Shutter
Release
Back O’ring
On/Off
Mode Dial
Exposure
O
Oppeenniinngg tthhee H
Hoouussiinngg
1. Lid Snaps have a LLoocckk.
To open, push the Lid Snap
Lock forward and lift as
shown. Keep pressure on the
Lid Snap so it does not fly
open quickly.
Some lid snaps have a lot of
spring tension once they go over center, so have a firm grip on
the lid snap. Lid Snaps may be opened one at a time.
Lift
Push Forward
Lid Snap Lock
4
IInnssttaalllliinngg tthhee CCaam
meerraa
Remove the back from
the housing. The
mounting tray for the
camera is secured to
the housing back.
Position the camera
and lens on the tray,
then secure it with the
mounting bolt which
threads into the
camera’s tripod socket.
SSeettttiinngg tthhee CCoonnvveerrssiioonn CCiirrccuuiittrryy SSttrroobbee IID
D SSw
wiittcchh..
On the bottom of the camera tray is a switch for setting the DS
Substrobe ID. Set the switch to the Model of DS Substrobe being
used.
• When using dual
strobes of different
models such as a DS51
and a DS125, set the ID
switch to DS51 or the
smaller strobe .
125
160
DS
DS
Set
DS Substrobes
to TTL Mode
50/51
200
80
O‘ring
Mounting Bolt
Mounting Tray
