Ikegami MKC-X800 User Manual Download Page 66

Page: 66 / 91

Settings

Check the SYNC output waveforms of the master CCU and the slave CCU, and adjust PHASE so that both H/V

phases are the same. The slave (unit with the GENLOCK connector connected) should be targeted for adjustment.
The master unit does not need the phase adjustments.

3D support function

This device has a 3D support function. The settings of various camera functions of the left and right units can

be synchronized and easily adjusted when the 3D system is constructed.

Connections and settings

The 3D system for this equipment is comprised of one master machine, one slave machine and a 3D-compatible

monitor. Connect each device as shown in the figure below.

■Connection Example

位相を合わせる

CCU (Master)

CCU (Slave)

Coaxial cable

RS-232C cross cable

ル

Video output cable
HD-SDI or DVI

3D-compatible monitor

Video output cable
HD-SDI or DVI

Master SYNC

Slave SYNC

Make phases consistent
with each other

Summary of Contents for MKC-X800




























































































Search results

Summary of Contents for MKC-X800

Reviews:

Ikegami MKC-X800, User Manual, Page: 66 / 91

Search results

Summary of Contents for MKC-X800

Reviews: