Ikegami MKC-X800, User Manual, Page: 63 / 91

63
5.11 Network
This unit can be externally controlled by a LAN connection. The network can be set up here.
Item Description
IP Address1~4 Sets the IP Address.
Subnet Mask1~4 Sets the subnet mask.
Setting To change settings, switch from [READY] to [START] and press the
ENTER button.
Current settings are displayed in the lower part of the screen.
※After changing the settings, restart the camera.
If "Please Restart Camera" is displayed at the bottom of the screen, please restart.
Changes to the network configuration are complete.
Network
Quit
IP Address1
192
IP Address2 168
IP Address3 2
IP Address4 100
Subnet Mask1
192
Subnet Mask2 168
Subnet Mask3 2
Subnet Mask4 1
Setting READY
IP Address
192.168.2.100
Subnet Mask
192.168.2.1