14
Changing the administrator’s registered information
When the network camera/encoder gets started with the administrator’s user name and
password, the settings can be modified. The initial settings are “admin” for the
administrator’s user name and “1” for the password.
With the network camera/encoder in place, it is advisable to modify these entries and to
prevent any unauthorized persons from changing the system settings.
①
Login Name
Enter the administrator’s login name. Up to 16 one-byte alphanumeric characters can
be entered, but [ “ ], [ ‘ ], [ & ], [ < ] and [ > ] cannot be used.
②
Password
Enter the administrator’s password. Up to 8 one-byte alphanumeric characters can be
entered, but [ “ ], [ ‘ ], [ & ], [ < ] and [ > ] cannot be used.
③
Password (Reentry)
Retype the administrator’s password
②
for confirmation.
④
Language Selection
Select a language to display onscreen.
