Ikegami FA-97A, Operation Manual

Page: 91 / 166

75
HDK-99 1803 VER1 (E)
5
CAMERA SETTINGS and ADJUSTMENT
5.1 Settings Using Switches on the Camera
5.1 Settings Using Switches on the Camera
Adjusting Headset Volume
This chapter explains how to control the headset volume.
CAUTION:
Do not set the INTERCOM-1 control knob, INTERCOM-2 control knob, INTERCOM-1 PGM-1/2 control knob, and INTERCOM-2
PGM-1/2 control knob to near maximum level from the beginning. Setting the volume level too high with the intercom headset on
your ears may damage your eardrums. If you suddenly set the volume level too high, it may also damage the headset. Excessive sound
pressure from the headset may cause a hearing loss.
INCOM ENG PROD INCOM ENG PROD
MIC-1 MIC-2
DC IN
PGM2
PGM1
MIC
ON
OFF
PTT
PROD
BOTH
ENG
MIC
ON
OFF
PTT
PROD
BOTH
ENG
INCOM
PGM2
PGM1
INCOM
REAR TALLY INCOM SEL
CALL
INCOM1 INCOM2
OFF ACT
FRONT
REAR
1 RET 2
FRONT
INC1 INC2
1
2
4
3
1
2
4
3
Q-TV/GL
EARPHONE
+12V
OFF
+48V
MON
MON SDI
SDI OUT
I/O
DC OUT
Camera right view Camera rear view
INTERCOM FRONT VR
SELECT switch
INTERCOM-1 MIC switch INTERCOM-2 MIC switch
INTERCOM-1
control knob
INTERCOM-1 PGM
control knob
INTERCOM-2 control knob
INTERCOM-2 PGM control knob
INTERCOM PHONE control knob
INTERCOM PGM control knob
■
Adjusting Intercom Volume
The intercom volume can be controlled on the rear or right side of the camera. Perform Step 1 to control the volume on the rear of
the camera, and Step 2 and 3 to control on the right side of the camera.
1
Turn the INTERCOM-1 control knob and INTERCOM-2 control knob on the rear of the camera to adjust the
volume.
2
Set the INTERCOM FRONT VR SELECT switch on the rear of the camera to INTERCOM-1 or INTERCOM-2.
3
Turn the INTERCOM PHONE control knob on the right side of the camera to adjust the volume.
CAUTION:
Be sure to adjust the volume to the appropriate level while listening to sound through the headset.