Ikegami FA-97A, Operation Manual

Page: 68 / 166

52
HDK-99 1803 VER1 (E)
3.5 CCU Connection
3.5 CCU Connection
This section explains how to connect the HDK-99 to the BS. CCU-980 as an example.
- Fiber camera cable : Diameter 9.2mm or 16mm, Maximum length 3000m (when CCU-980 is used)
Connecting Camera and CCU
INCOM ENG PROD INCOM ENG PROD
MIC-1 MIC-2
DC IN
PGM2
PGM1
MIC
ON
OFF
PTT
PROD
BOTH
ENG
MIC
ON
OFF
PTT
PROD
BOTH
ENG
INCOM
PGM2
PGM1
INCOM
REAR TALLY INCOM SEL
CALL
INCOM1 INCOM2
OFF ACT
FRONT
REAR
1 RET 2
FRONT
INC1 INC2
1
2
4
3
1
2
4
3
Q-TV/GL
EARPHONE
+12V
OFF +48V
MON
MON SDI SDI OUT
I/O
DC OUT
Fiber cable
Camera rear view
CAMERA connector
CAMERA connector
CCU-980 rear view
1
Connect the CAMERA connector on the rear of the CCU-980 to the CAMERA connector on the rear of the
camera via a fiber cable.
CAUTION:
- The fiber cable has a plug connector on one end and a socket connector on the other end. Be sure to connect the plug
connector to the camera and the socket connector to the CCU.
- Secure the fiber cable with the CAMERA CABLE clamp on the left side of the camera to remove any slack. Refer to
"SAFETY PRECAUTIONS" described at the beginning of this manual for how to secure the cable with the cable clamp and
how to handle the fiber cable.