IKEA 503.660.68, Manual, Page: 28 / 36

ENGLISH 28
Before contacting the After-Sales Service:
Restart the appliance to see if the fault
has been remedied. If it persists, switch
the appliance off again and repeat the
operation after an hour.
If your appliance still does not work
properly after carrying out the checks listed
in the troubleshooting guide and switching
the appliance on again, contact the After-
sales Service, clearly explaining the problem
and specifying:
• the nature of the problem
• the model
• the type and serial number of the
appliance (given on the rating plate)
• the Service number (the number after the
word SERVICE on the rating plate inside
the appliance).
Note: if the direction of door opening is
reversed, this operation is not covered by
the warranty.
Technical data
Model identification: C 185 E
Product dimensions (mm)
Height 1770
Width 540
Depth 545
Net Volume (l)
Refrigerator 314
Freezer n/a
Defrost system
Refrigerator Automatic
Freezer n/a
Star Rating n/a
Rising Time (h) n/a
Freezing capacity (kg/24 h) n/a
Energy consumption (kwh/24h) 0.315
Noise level (dba) 34
Energy class A++*
Energy class A+**
XXXXXXXXXXXXX XXXXXXXXX
XXXXXXXXXXXXX XXXXXXXXX
XXXXXXXXXXXXX XXXXXXXXX XXXXXXXXXXXXX XXXXXXXXX
XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
00000
The technical informations are situated in the
rating plate inside the appliance.
The date of manufacture of the product is
the serial number (serial number), where the
third and fourth digits correspond to the last
two digits of the manufacturing year and the
fifth and sixth digits as the annual number
of the week. For example, the serial number
001509012345 means that the product was
produced in the ninth week of 2015
* (Regulation (EC) No. 1060/2010 of 28 September 2010)
** (Ministry of Industry and Trade of the Russian
Federation ORDER dated September 7, 2010 N 767)
Environmental concerns
WARNING!: Ensure that the
appliance is switched off and
disconnected from the power
supply before performing any
maintenance operation - risk of
electrical shock. Never use steam
cleaning equipment
Do not use abrasive or harsh cleaners such
as window sprays, scouring cleansers,
flammable fluids, cleaning waxes,
concentrated detergents, bleaches or
cleansers containing petroleum products
on plastic parts, interior and door liners or
gaskets.
Do not use paper towels, scouring pads, or
other harsh cleaning tools.