manualshive.com logo in svg

iKarus Stellar Mate Plus, User Manual

Share
Download
iKarus Stellar Mate Plus User Manual Download Page 152

The StellarMate Plus Manual

152 / 227

Tip

Pentax cameras are supported in INDI GPhoto driver and also in INDI Native
Pentax driver. The native driver is experimental but offers more support to Pentax
cameras. It’s recommended to try both drivers to see which is more fit for your
specific camera model.

Captured images are downloaded to StellarMate, and depending on the sensor size and
the quality of the WiFi connection, it can take a few seconds for large frames to transfer.
Live view video streaming is available on most models to aid in focusing the camera.
Selected Canon cameras support focusing operations and can autofocus using the Ekos
Focus module. Manual focus is available via Live View or Bahtinov Mask Assistant Tool.

Supported DSLRs

StellarMate 

supports a wide selection of DSLR cameras

 manufactured by popular brands

like Canon, Nikon and several others. The following is a list of the most popular supported
cameras.

Canon

Supported Models

Digital Rebel XT (normal mode)

EOS 650D

EOS (WLAN)

EOS 6D

EOS 1000D

EOS 6d Mark II

EOS 100D

EOS 700D

EOS 10D

EOS 70D

EOS 10D (PTP mode)

EOS 750D

EOS 1100D

EOS 760D

EOS 1200D

EOS 77D

EOS 1300D

EOS 7D

EOS 1500D

EOS 7D MarkII

EOS 1D C

EOS 800D

EOS 1D Mark II (PTP mode)

EOS 80D

EOS 1D Mark III (PTP mode)

EOS 90D

EOS 1D Mark IV

EOS D30

EOS 1D X

EOS D60

EOS 1D X MarkII

EOS Digital Rebel (normal mode)

EOS 2000D

EOS Digital Rebel (PTP mode)

EOS 200D

EOS Digital Rebel XTi (PTP mode)

Summary of Contents for Stellar Mate Plus




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands