UNO Synth
Pro Editor
2 - The Top Bar
12
Chapter 2 – The Top Bar
The Top Bar lets you choose between the 2 main panels of the application: Synth and Presets.
The current preset is displayed in the center of the bar, and you can view and select between all of the presets
loaded in the synthesizer by clicking and scrolling up and down on the preset name field. You can also Load and
Save banks of presets and also Store the current preset that you are editing.
Controls:
• Synth: The Synth Panel displays all the parameters of the loaded preset including its effects. This is the
default view. The Synth Panel has 3 tabs: Engine, Matrix and Effects. Engine is where you will find all of
the traditional synthesizer blocks such as oscillators, filters, envelopes and LFOs. Matrix lets you program
the 16-part Modulation Matrix where you assign a source to modulate and destination by a set amount.
The Effects tab lets you edit the 4 effects processors in the UNO Synth PRO: Drive, Modulation, Delay and
Reverb.
• Presets: The Presets Panel lets you manage banks of presets and transmit them to and from the UNO
Synth PRO hardware.
• Load: click to Load a preset from your computer preset folder into the UNO Synth PRO
• Save: click to Save the current preset into your computer preset folder
• Store: click the Store button to store the edit of the current preset in UNO Synth PRO hardware.
