UNO Drum
4 – Front panel interface
16
4.1.2 – FX Row
The FX row is a global row, meaning the listed parameters will affect the master output of the UNO Drum.
COMP:
abbreviation for compressor, it is an Audio Effect positioned in the master output. This control adjusts
the threshold of the analog master compressor circuit.
Values goes from 0 to 127 adjusting the amount of compression and auto make-up.
The compressor values cannot be recorded in an element pattern or a pattern.
The compressor values is stored in a KIT.
DRIVE:
is an Audio Effect positioned in the master out. This control adjust the amount of distortion given by the
analog drive circuit.
Values go from 0 to 127 adjusting the amount of distortion.
The drive value cannot be recorded in an element pattern or a pattern.
The drive values is stored in a KIT.
The following 2 controls are the settings for the MIDI effect, STUTTER. This control adjusts the parameters for
the momentary button STUTTER, which is located in the Play/Program section.
When the stutter button is pressed the selected type and amount are enabled from the first step played after the
press of the button.
STUTTER and STUTTER AMOUNT:
the STUTTER is a MIDI Effect. This control decides between the 10 types
of stutter available and stutter type is strictly linked to the amount value and the result changes in relation with
the recorded pattern and on when the button STUTTER is pressed.
