ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
CAUTION
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Loosen the ‘thumb screw’ to remove the Stand-Base from the monitor.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Install the Stand-Base as shown on the above picture.
Tighten the 'thumb screw' to secure the Stand-Base to the monitor.
Thumb screw for Stand-Base
Stand-Base
Stand-Base
Hook
FITTING AND REMOVAL OF BASE
<Removing the stopper> *
Place the monitor upright on a flat, stable surface.
1. Remove the tape.
2. Push down the monitor head.
3. Remove the stopper.
1
2
3
*
with stopper models
Summary of Contents for ProLite XUB2792HSC
Page 2: ...ENGLISH...
