iiNet TG-1 User Manual Download Page 38

Page: 38 / 65

THE TG-1 GATEWAY GUI

DMS3-CTC-25-115 v1.0

4.4.1 Gateway

The Gateway card

The

Gateway

card displays:



The software version currently installed on the TG-1 Gateway.



The serial number of your TG-1 Gateway.



The uptime. This is the time that has elapsed since power on of the TG-1 Gateway.

The Gateway page

To open the

Gateway

page, click the

Gateway

card.

The

Gateway

page allows you to:



View basic information about the TG-1 Gateway.



View or change the time settings used by the TG-1 Gateway.



Restart the TG-1 Gateway.



Reset the TG-1 Gateway to factory defaults.
For more information, see

“7.4 Reset to factory defaults” on page 60



Export your current configuration.



Import a previously saved configuration.



Upgrade the firmware of the TG-1 Gateway (if available).

Summary of Contents for TG-1


































































Search results

Summary of Contents for TG-1

Reviews:

Related manuals for TG-1

Brands by name

Popular brands

iiNet TG-1, User Manual

Search results

Summary of Contents for TG-1

Reviews:

Related manuals for TG-1

Brands by name

Popular brands