Installation
Draco MultiView 4K
60
66
5.2.6 Connecting to the Draco MV via Device Finder
At least FTP rights are required.
Up to 16 between the Draco MV and the management software can be established at the same time due to
a limitation of available sockets.
The
Device Finder
offers the possibility to find all Draco MV that are in the same subnet. This is useful,
e.g., if the IP address of a specific Draco MV is unknown and should be accessed via IP.
Fig. 48
Management software menu
Device Finder
The following device information is shown in the
Device Finder
:
Information
Description
Broadcast/Multicast
Search parameters for finding devices.
Search via broadcast: 255.255.255.255 (default).
Input for search within a multicast group: multicast address (chapter 6.2.2,
page 73)
Device
Name of the device
Name
Name of the active configuration
IP Address
Current IP address of the device
MAC Address
MAC address of the device
Type
Type of the device
The last column of the
Device Finder
can be used to connect to the respective Draco MV by directly
clicking
Connect
.
