Specifications
Draco MultiView 4K
60
212
17.1.6 GPIO
An external switching solution (dry contact) with up to four buttons, each of which one associated LED can
be connected to this interface. After pressing a button, the associated input is switched. The switching
carried out is indicated on the associated LED. For instance, button 1 is assigned to the USB-B port for
source 1. Max. 1.100 mA is supplied at the port for the power supply voltage (pin 3) that is protected by a
fuse. Each other port is limited to a maximum current draw of 170 mA.
17.1.7 RJ45 (Network)
The Draco MV offers a 1000BASE-T interface to establish a network connection to a computer. All four wire
pairs are used in both directions. The cabling is suitable for a full duplex operation.
17.1.8 3,5 mm Audio Interface (Optical Digital/Analog)
The Draco MV with optical-digital audio interface supports the unidirectional transmission of digital audio
data. This is a combined interface that can output both digital and analog. The output can be either digital
or analog at any moment.
Up to four sources can be connected to the Draco MV. The audio data of all sources will be transmitted to
the Draco MV at the same time, but only the audio signal of the active source will be provided at the audio
output. With activated Merge Audio Signals option, merged audio signals are output at the video outputs
and via analog audio devices at the audio outputs.
Specifications Digital Audio
Parameters
Values
Compatibility
S/PDIF, EIAJ RC-5720B, JIS C 6560
Standards
7.1-Channel, Stereo Linear Pulse Code Modulation (LPCM)
Bit depth
24 bit
Sample rate
32 to 96 kHz
Connector
2x 3.5 mm Mini-Toslink (optical)
Specifications Analog Audio
Parameters
Values
Standards
Digitized virtually CD quality audio
Bit depth
24 bit
Sample rate
Up to 192 kHz
Signal level
Line-Level (5 Volt Pk-Pk maximum)
Connector
2x 3.5 mm stereo jack plug (audio output)
