Ihse Draco vario 474 Series User Manual Download Page 37

Page: 37 / 77

474-Add-on Modules

Description

4.7.5 Add-on Modules USB 2.0 embedded L-/R474-BXE2

Source side (CPU module)

Sink side (CON module)

Fig. 42

Interface side add-on module USB 2.0 – Status LEDs L-/R474-BXE2

1  USB 2.0 status LED
2  Connect status LED
3  Link status LED

The following tables show the respective LED states/colors of the CPU add-on module (column 2) and the CON add-
on module (column 3) for the respective situation.

Pos. LED CPU Unit

LED CON Unit

Description of possible situations

Off

USB 2.0 Link connection between CPU Unit and CON Unit not

available.

Off

Green,

flashing

Green,

flashing

Off

•

USB 2.0 Link connection between CPU Unit and CON Unit

available.

•

USB connection between CPU Unit and source not available.

Off

Green

Green,

flashing

Green,

flashing

•

USB 2.0 Link connection between CPU Unit and CON Unit

available.

•

USB connection between CPU Unit and source available.

Green

Summary of Contents for Draco vario 474 Series














































































Search results

Summary of Contents for Draco vario 474 Series

Reviews:

Related manuals for Draco vario 474 Series

Brands by name

Popular brands

Ihse Draco vario 474 Series, User Manual

Search results

Summary of Contents for Draco vario 474 Series

Reviews:

Related manuals for Draco vario 474 Series

Brands by name

Popular brands