Draco U-Switch
Operation
41
8.4 Summary of Keyboard Commands
In the following you find a summary of keyboard commands that can be used in conjunction with the
U-Switch.
Keyboard Command Function
<Hot Key>, <c>,
<new Hot Key
code>, <Enter>
Change the Hot Key according to the predefined Hot Key table
<Hot Key>, <c>,
<0>, <new Hot
Key>, <Enter>
Set a freely selectable Hot Key
<Right Shift>
+ <Del>
within 5 s
after switching on the
CON Unit or plugging in
a keyboard
Reset the Hot Key back to default settings
Keyboard Command Mode
<current Hot
Key>, <o>, <x>,
<0>, <Enter>
Mode 0 (deactivate the switching via mouse, mouse in absolute mode)
<current Hot
Key>, <o>, <x>,
<1>, <Enter>
Mode 1 (horizontal: 4x1, mouse in absolute mode)
<current Hot
Key>, <o>, <x>,
<2>, <Enter>
Mode 2 (block: 2x2, mouse in absolute mode)
<current Hot
Key>, <o>, <x>,
<3>, <Enter>
Mode 3 (vertical: 1x4, mouse in absolute mode)
<current Hot
Key>, <o>, <x>,
<4>, <Enter>
Mode 4 (free, individual layout, mouse in absolute mode)
<current Hot
Key>, <x>, <d>,
<Enter>
Deactivate unused or non-connected ports
<current Hot
Key>, <x>, <e>,
<Enter>
Reactivate unused or non-connected ports
<current Hot
Key>, <x>, <c>,
<Enter>
Reactivate all unused or non-connected ports
<current Hot
Key>, <x>, <m>,
<Enter>
Restrict the automatic switching of the Multi-Screen Control when using mode 1,
2, 3, or 4. The mouse cannot cross the display borders.
