Draco U-Switch
Operation
37
8
Operation
8.1 Switching via Keyboard
The Multi-Screen Control function contains a switching of the USB-HID signal between different statically
connected sources (computer, CPU) and displays and can be performed via keyboard or mouse (see
chapter 8.2, page 38).
To perform a switching operation via keyboard command, proceed as follows:
1. Enter the
<current Hot Key>
to start the command mode.
The
Caps Lock
and
Scroll Lock
LEDs on the keyboard are flashing.
2. Enter the number of the specific source or display.
3. Press the
<Enter>
key to confirm.
At the same time the command mode is closed, the switching operation will be performed, and
keyboard and mouse are connected to the specified source or display.
When using the numeric keypad for switching, a confirmation of the switching operation by pressing the
<Enter>
key is not necessary.
The following keyboard commands are available for switching operations (e.g., using the numeric keypad):
Keyboard command
Function
<current Hot
Key>, <Num 0>
Switch the USB-HID signal to the own display (CON Unit with keyboard and
mouse)
<current Hot
Key>, <Num 1>
Switch the USB-HID signals to display 1
<current Hot
Key>, <Num 2>
Switch the USB-HID signals to display 2
<current Hot
Key>, <Num 3>
Switch the USB-HID signals to display 3
<current Hot
Key>, <Num 4>
Switch the USB-HID signals to display 4
