Draco tera flex
Configuration via Management Software
215
Copying Settings from another CON Device
To copy settings from a CON Device to another CON Device, proceed as follows:
1. Select
Extender & Devices > EXT Units
in the task area.
2. Click the
Activate Edit Mode
menu item in the toolbar.
3. Select the CON Device to copy the settings to. By pressing and holding down the
<Ctrl>
key at the
same time, more than one CON Device can be highlighted.
4. Click the
Copy Settings from
button below the CON Device list.
A query to select the settings appears.
5. Click the checkboxes for the desired settings.
6. Click the
Next
button.
Fig. 160
Management software menu Extender & Devices - CON Devices - Select Settings
A query to start the assignment appears.
7. Select the CON Device in the selection list from which the settings are to be copied.
8. Click the
Finish
button.
The settings are immediately copied to the selected CON Devices.