![Ihse Draco tera enterprise 480 Series User Manual Download Page 192](http://html.mh-extra.com/html/ihse/draco-tera-enterprise-480-series/draco-tera-enterprise-480-series_user-manual_623699192.webp)
Configuration via Management Software
Draco tera enterprise
192
7.5.5.2 Copying Settings from another User
To copy settings from a user to another user, proceed as follows:
1. Click
Extender & Devices > EXT Units in the task area
.
2. Click
Activate Edit Mode
in the toolbar.
3. Select the user to copy the settings to. By pressing and holding down Ctrl at the same time, more than
one user can be highlighted.
4. Click
Copy Settings from
below the user list.
A query to select the settings appears.
5. Tick the checkboxes to select the desired settings to be copied.
6. Click
Next >
.
Fig. 123 Management software menu
Users & Groups - Users - Select Settings
A query to start the assignment appears.
7. Select the user in the selection list from which the settings are to be copied.
8. Click
Finish
.
The settings are immediately copied to the selected user.