Ihse Draco tera 480 Series User Manual Download Page 99

Page: 99 / 261

Configuration

2020-02-26

Pos : 66 / 806-IHSE/ Konfig urati on/Sy st emei nst ellung/480-xx/N etzw erk (N etwork) @ 7\m od_1309938178305_6. doc @ 53122 @ 3 @ 4

5.4.5

Network

The network configuration is set in this menu.

You have the following options to access the menu:

You can select the following settings:

Field

Selection

Description

DHCP

activated

The network settings are automatically
supplied by a DNS server

Note:

If DHCP is activated and there is

no physical network connection
available, the boot times might increase.
2nd field for redundant CPU board

deactivated Function not active (default)

IP address

Byte

Input of the IP address, if DHCP is not
active (default: 192.168.100.99)

Note

: 2nd field for redundant CPU board

Subnet Mask

Byte

Input of the subnet mask in the form
"255.255.255.0", if DHCP is not active
(default: 255.255.255.0)

Note

: 2nd field for redundant CPU board

Multicast

Byte

Input of the Multicast address, if there is
a Matrix Grid in use within a Multicast
group (default: 255.255.255.255)

Gateway

Byte

Input of the subnet mask in the form
"192.168.1.1", if DHCP is not active

Note

: 2nd field for redundant CPU

board. When using the controller board
480-CTRL2, entering a gateway is
obligatory.

API Service

activated

LAN interface at the Draco tera activated
for access via Java Tool (API service
port 5555)

deactivated Function not active

SSL

activated

Activate SSL encryption for API, Java
Tool API, Java Tool und Matrix Grid
communication (only with 480-CTRL2).

deactivated Function not active (default)

Summary of Contents for Draco tera 480 Series






































































































































































































































































Search results

Summary of Contents for Draco tera 480 Series

Reviews:

Brands by name

Popular brands

Ihse Draco tera 480 Series, User Manual

Search results

Summary of Contents for Draco tera 480 Series

Reviews:

Brands by name

Popular brands