Maintenance
2020-02-26
247
8
Maintenance
The Draco tera contains various components and assemblies that can be
maintained. All relevant components and assemblies are hot swappable
and can be removed and exchanged during operation.
The following exchangeable components can be found within the Draco
tera:
8.1
Power Supply Units
In order to exchange the power supply units, proceed as follows:
1. Make sure that the power cord cable is removed from the power
supply that has to be exchanged.
2. Unlock the locking screw(s).
3. With the power supply units of Draco tera 288, 160 and 152, turn the
unlocked bracket down.
4. Pull the power supply unit out of the corresponding slot.
5. Push a new or maintained power supply unit into the slot and lock it
accordingly.
6. Connect the power cord cable to the power supply unit. It will be
recognized by the system and can be used afterwards.
8.2
Fan trays
In order to exchange the fan trays, proceed as follows:
1. Unlock the locking screw(s).
2. Pull the fan tray out of the corresponding slot by using the provided
mount.
3. Push a new or maintained fan tray into the slot.
4. Lock the fan tray accordingly. It will be recognized by the system and
can be used afterwards.
