Ihse Draco tera 480 Series User Manual Download Page 231

Page: 231 / 261

Operation

2020-02-26

231

Pos : 136 /806- IHSE/ Betri eb/Ei n- und Aus schaltf unkti onen/U EB_Ei n-_und_Aussc haltf unktionen @ 7\m od_1309940964258_6. doc @ 53601 @ 2 @ 1

6.13 Power On and Power Down Functions

Pos : 137 /806- IHSE/ Betri eb/Ei n- und Aus schaltf unkti onen/ 480-xx/N eust art @ 7\mod_1309941015165_6.doc @ 53620 @ 3 @ 4

6.13.1 Restart

You have the following options to perform a restart:

OSD

1. Select

Configuration > Restart Matrix,

Restart IO Board

Restart

CPU Board

in the main menu to restart either the matrix, the

I/O boards or the CPU board.

2. Confirm the selection with

Okay

button.

The matrix, the I/O boards or the CPU board will be restarted with the
current settings.

Java Tool

➔

Select

Device > Advanced Service > Restart Matrix

in the menu

bar.

The matrix will be restarted with the current settings.

The boot process of the matrix might take longer, if there is no physical
network connection available.

Pos : 138 /806- IHSE/zz _Lay out/ Sei tenumbr uch @ 8\m od_1348581820516_0. doc @ 69462 @ @ 1

Summary of Contents for Draco tera 480 Series






































































































































































































































































Search results

Summary of Contents for Draco tera 480 Series

Reviews:

Related manuals for Draco tera 480 Series

Brands by name

Popular brands

Ihse Draco tera 480 Series, User Manual

Search results

Summary of Contents for Draco tera 480 Series

Reviews:

Related manuals for Draco tera 480 Series

Brands by name

Popular brands