Operation
2020-02-26
219
1. Select the respective CPU Device in the CPU selection list containg
the extender you want to have access to.
2. Press the function key <
F7
> on the keyboard. The standard will
change into the switching mode for single extenders.
3. Select the extender you want to switch within your CON Device.
4. Access the extender list of the selected CPU Device by pressng the
key <
Tab
>.
5. Select the CPU extender you want to switch to and press the key
<
Space
> in order to execute the switching operation.
Switching of single extenders from a Device is only possible in video only
mode. Single exenders of a Device that are already switched will be
highlighted with "
!
".
Pos : 127 /806- IHSE/ Betri eb/480_C ON Switc h/ 480_C ON Switc h @ 9\mod_1375172364133_6.doc @ 79232 @ 2 @ 4
6.6
CON Switch
KVM extender CON Units connected to a local source (computer, CPU)
can be locally switched via the matrix. Switching is performed between the
local source and the KVM connection and can be executed via 'Hot Keys'
or via OSD.
If you switch to the local source, the KVM connection will be automatically
disconnected.
When using CON Units with the possibility to connect a local source
(computer, CPU) in a Multi-Screen Control environment, the local
switching will be disabled.
You have the following option to switch to the local source:
