Draco tera
170
2020-02-26
16. Enter either the Common Name (CN) of a right group or the Common
Name (CN) of an organizational unit into the field
LDAP OU=/CN=
as
shown below:
a. OU= name of the organizational unit
b. CN= name of the right group
17. Confirm the creation of the user by pressing the button
Apply
.
The Active Directory synchronization can be used now.
Pos : 94 / 806-IHSE/ Konfig urati on/480_Speic her n und Laden v on Konfigurationen/ 480-xx /Speic hern und Laden v on Konfigur ationen @ 7\m od_1309938757899_6. doc @ 53292 @ 2 @ 1
5.14 Saving and Loading of Configurations
You have the option to set the following administration of configurations:
Pos : 95 / 806-IHSE/ Konfig urati on/480_Speic her n und Laden v on Konfigurationen/ 480-xx /Zwisc hens peic hern v on Konfigur ati onen @ 7\m od_1309945736118_6. doc @ 54172 @ 3 @ 1
5.14.1 Active Configuration
You have the following option to access the menu:
➔
Select
Configuration > Save
in the main menu.
By selecting this menu item, the active configuration of the matrix is
saved to the permanent matrix memory. By default, the last
configuration that has been saved in this way will be restored after a
restart of the matrix.
Changing or saving configurations blocks the matrix memory and leads to
a freeze of all OSD menus for a few seconds. The switching connections
are not affected by this freeze.
If you select
Auto Save
within the system settings an additional automatic
saving of the configuration will be periodically performed (see Chapter
5.3.2, Page 80).
Pos : 96 / 806-IHSE/ Konfig urati on/480_Speic her n und Laden v on Konfigurationen/ 480-xx /Speic hern von Konfig urati onen (inter n) @ 7\m od_1309938789321_6. doc @ 53310 @ 3 @ 4
