manualshive.com logo in svg

Ihse 474-SNMP, User Manual, Page: 40 / 107

Share
Download
Ihse 474-SNMP User Manual Download Page 40

Configuration via Management Software 

SNMP Module 

40 

5.4.3  Setting the Syslog Function 

The parameters for the syslog function are set in this menu. 

NOTICE 

A change in system-relevant parameters (e.g. change of the Syslog server) is immediately displayed in 

the management software. To initialize system-relevant configuration changes on the SNMP module, the 

SNMP module must be restarted. The restart of the SNMP module may take several minutes, and the 

SNMP module is not available during the restart. 

 

 

Fig. 28 

Management software menu 

System Settings - Network - Syslog

 

 

 

The following parameters can be configured: 

Field 

Entry 

Description 

Enable Syslog 

Activated 

Syslog server to query status is active 

Deactivated 

Function not active (default) 

Syslog Server 

Byte 

Input of the IP address of the syslog servers in the form 

“192.168.1.1” 

Port 

Byte 

Input of the syslog ports (default: 514) 

Log Level 

DEB 

Activate debug messages in syslog (default: N) 

Note:

 The debug messages are exclusively for SNMP module 

diagnostics. Use this function only for concrete debug cases as 

it is not intended for normal operation. 

INF 

Activate information messages in syslog (default: N) 

NOT 

Activate notification messages in syslog (default: Y) 

WAR 

Activate warning messages in syslog (default: Y) 

ERR 

Activate error messages in syslog (default: Y) 

 

 

 

 

Summary of Contents for 474-SNMP












































































































Reviews:

No comments