IHP.US.com
506019-40 A
1
P/N 506019-40 Rev. A 05/2015
P506019-40
HEARTH PRODUCTS
KITS AND ACCESSORIES
CONTEMPORARY FAÇADE KITS
INSTALLATION INSTRUCTIONS FOR CONTEMPORARY FAÇADE KITS
FOR USE WITH MERIT™ SERIES MLDVTCD-35 GAS FIREPLACES
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
GENERAL INFORMATION
CONTEMPORARY
FAÇADE KITS
The Contemporary Façade Kit is composed of three separate elements
that are purchased separately. Refer to Table 1.
NOTE: To complete one Façade a selection of one Base, one Frame and
one Façade Trim must be made.
The frame must be installed on a properly positioned MLDVTCD fireplace.
Refer to manual number 506015-03 for detailed instructions. Refer to
Figure 1 for façade significant dimensions.
NOTE: The fireplace must be positioned at least 18” up the wall to use
the co ntemporary façade
INSTALLATION INSTRUCTIONS FOR CONTEMPORARY FAÇADE KITS
FOR USE WITH MERIT™ SERIES MLDVTCD-35 GAS FIREPLACES
HEARTH PRODUCTS
KITS AND ACCESSORIES
50609-40
REV. N/C 04/2009
Figure 1
44-3/4”
33”
24”
35-/2”
29”
8” Min. Required
> 28” Recommended
Floor
Fireplace
6”
32”
35”
Contemporary Façade Kits
Choose One Base (Largest Piece Immediately Against The Finish Wall)
Cat. No.
Model No.
Description
H7732
CDFBBK-35
Façade Base, Black
H7733
CDFBSS-35
Façade Base, Stainless
Choose One Frame (Inner Façade Frame Piece Surrounding The Opening)
H7730
CDFFBK-35
Façade Frame, Black
H773
CDFFSS-35
Façade Frame, Stainless
Choose One Trim (Finishes The Inner Frame Opening)
H7727
CDTKBK-35
Façade Trim, Black
H7728
CDTKSS-35
Façade Trim, Stainless
H7729
CDTKBR-35
Façade Trim, Polished Brass
Table 1
Base
Trim
Frame
TOOLS REQUIRED
1 - Phillips Screwdriver, 1 - 5/16” Nut Driver
f i r e - p a r t s . c o m
