Install Clock Backup Batteries
Battery Warning
9
P12
Dimmer Operation
During normal operation, press the
Snooze Button
to control the brightness of the LCD display.
The iA100 uses 2 x AA backup batteries to provide backup alarm operation and
clock settings in the event of a power failure. If the Backup Batteries have been
installed and a power failure occurs or the AC cord is accidentally disconnected,
the display backlight will not remain lit, but current time and alarm time settings
will be temporarily maintained. Otherwise, you must reset the time and alarm
settings.
1. Open backup battery compartment door located on the bottom of the unit.
2. Please make sure the AC adaptor is connected. Otherwise all settings may be
lost during battery replacement.
3. Insert 2 AA batteries, checking that the polarity (+ and – ends of the battery)
matches the drawing near the battery compartment. Close the compartment
door.
Note:
Make sure you dispose of batteries properly (see your local regulations).
Installing Backup Batteries
For models that require more than one battery
• Do not mix with used or other battery types/brands
• Replace all batteries at the same time
• Do not open batteries
• Do not dispose of in fire
• Do not heat above 75ºC (167ºF)
• Do not expose contents to water
• Do not charge or recharge
• Do not install backwards
