Hi20
Quick Setup Guide
Included
• Hi20 Triple AC Outlet and 4x USB Charging Hub
• Cable bracket with 2x Phillips head mounting screws
Set Up & Installation
1. Locate a working 120V outlet that is NOT
controlled by a light switch. The outlet should be
near (within 5.5 feet of) the back edge of the desk or
table you wish to mount the Power Plug to.
3. Place the unit about 3 inches (80mm) from the
back edge of the desk or table with the Power Plug
outlets facing forward.
Reset Button
This unit has an internal circuit breaker.
If the unit is overloaded or ceases to operate for
any reason, press the Reset Button to restore
normal operation.
4. Place security bracket over cable against the
top or back of the desk/table in desired location
and screw in the 2 provided screws to attach
bracket. The screws are self-tapping and should
not require drilling of guide holes.
RESETRESET
TESTTEST
2. Plug the Power Plug into the outlet. The green
power LED on front of the unit will light. Note there is
an addtional courtesy outlet on the plug to connect a
table lamp or other appliance.
5 ½ feet
outlet
Hi20 Quick Start Guide (English)
Int’l version
- Front
Size: 400 x 140 mm
Color: 1C + 1C (Black)
Material: 100 gsm WF paper
Date: May. 5, 2017
