Wireless Speaker Table
ASSEMBLY INSTRUCTIONS
GALAXY LIGHT-UP
PLEASE READ BEFORE USE
Please save for future reference.
E359482
EC-70
FCC STATEMENT
CUSTOMER SUPPORT
WARRANTY
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
BEFORE USING THIS PRODUCT
PLEASE CAREFULLY READ THE INSTRUCTIONS FIRST.
© 2021 brand. iHip is a trademark, Registered in the U.S. and other countries. All Rights Reserved. The
illustrated product and specifications may differ slightly from that supplied. All other trademarks and trade
names are those of their respective owners. For ages 12+up. This is not a toy. Limited One Year Warranty.
Designed by iHip in the U.S.A., Manufactured in China.
iHip
19 Progress St. Edison, NJ 08820
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by "iHip" is under license. Other trademarks and trade names are those of their
respective owners.
For any questions or concerns
regarding this product please
email us at:
To register your product and warranty information
please visit www.ihip.com
IMPORTANT INFORMATION
· When you power on the speaker and not pair the Bluetooth for 20 mins,
the speaker will power off automatically and will have a remind sound.
· Read this manual carefully before using this device and keep it for future
reference.
· Keep the device away from heat, direct sunlight and sharp edges.
· Do not insert any metallic object into this device, it’s a risk of short circuit!
· Please avoid a static charge, do not use the device in an extremely dry
climate.
· Do not repair the unit by yourself, contact an authorized specialist.
**The table must be plugged
in for the wireless charging
function to work.**
1- Plug in your table Speaker with the included Charging Cable (4)
WIRELESS CHARGING
2- Place your wireless charging enabled device in the middle
of the table (B)
C
B
B
Your device needs to be able to charge
wirelessly for this function to work.
If your device isn’t charging properly please try the following:
1. Remove your device from it’s case.
2. Remove any element or accessories in between the table speaker and your device.
3. Make sure your device is placed right in the middle of the table.
- 4 -
