iHerz iFlow, User Manual, Page: 13 / 46

EN
13
Troubleshooting
PROBLEM FACTOR SOLUTION
Too much noise No filter in the unit. Put a filter in the unit.
The nebulizer
does not run
Compressor switch
is off.
Turn the unit on.
Nebulizer was not
cleaned after its previ-
ous use.
Clean the unit.
Air hose is bent.
Remove any bends or
kinks in the air hose.
The filter is clogged. Replace the filter.
No medication is left.
Add the appropriate
amount of medication pre-
scribed by your physician
to the cup.
The cap is not at-
tached properly.
Reattach the cap.
Water drops have
formed in the air
hose.
The medication was
overfilled.
Add appropriate amount
of medication to cup, con-
nect the air hose to the air
compressor, and turn the
unit on.
The nebulizer kit was
washed but not dried.
Open and close the nebu-
lizer kit repeatedly until the
drops disappear.
NOTE: If the device is not functioning correctly in spite of inspections
effected, contact the iHerz
®
service center in your country.