Product Overview
D8-3_EN
– V1.0
5/14
2
Product Overview
This motor controller can control stepper motors with up to 4 A continuous current at a supply voltage of up to 48 V.
Ready for immediate use
Connect the voltage source, control signals and motor and you're ready to go. No complicated software installation or time-
consuming wiring of various additional switches and sensors.
Simple control
With the loop mode, a continuous movement between 2 limit switches can be executed without the need for a master controller.
The movement is executed at a fixed pre-set speed.
Precise positioning
When using the Pulse Mode, simple clock signals can be used for highly precise positioning. In combination with a PLC or a
microcontroller, even highly complex applications can be realised.
2.1
Technical Data
2.1.1
Dimensions
2.1.2
Mechanical Data
D x W x H motor controller in mm
75,5 x 33 x 112
Weight
300 g
