Chapter 2 Hardware
UBA Bill Validator Connectors & Sensors
The UBA bill validator does not require field calibration. It only requires calibration when a
component (sensor) board or the CPU Board is replaced. The calibration process involves a PC
based program that adjusts the sensors to factory levels and is done at the repair depot only.
Figure 2-53 UBA Connectors and Sensors
Number
Description
Number
Description
1
PB-In Sensor
6
Pusher Home Sensor
2
Centering Mechanism Timing
Sensor
7
Cashbox Installed Sensor
3
Entrance Sensor
8
Exit Sensor
4
PB Home Sensor
9
Centering Mechanism Home
Sensor
5
Transport Motor Encoder Sensor
10
Stacker Mode Encoder Sensor
Cobalt™ 27
67
Summary of Contents for Cobalt 27
