24
25
iGO RIDE
CONNECT/SELECT eBIKE
From the home screen, use the CONNECT/SELECT eBIKE
icon to scroll through all iGO eBikes currently associated
to your iGO Ride account. Use the final tab to scan for
(or manually identify) additional iGO eBikes.
Details and settings for the selected iGO eBike will be shown on the
home screen and in the eBIKE OPTIONS MENU and TRIP HISTORY.
MAP
The map function provides GPS and navigation functions to the iGO
Ride mobile app. Turn by turn directions, ride tracking and the ability
to share your rides on messaging apps and social media (location
tracking must be active to use the GPS based functions of the map).
Ride tracking
You can record your rides for viewing or messaging.
Press START RIDING on the map page to begin recording a ride.
To stop the ride recording feature press STOP RIDING.
Battery power and GPS signal strength are always in view
while on the map screen. You will also see the ride in progress,
Riding Time, Odometer, Average Speed, and Power in Watts.
TRIP HISTORY
In trip history use CHECK NOW to enter the past rides list. Here
you can view all of the rides recorded over a 30 day period.
Select each to see the Riding Distance, Riding Time, Average
speed, top speed, and Total Distance travelled to date.
You can share this information to any messaging email
or texting software by using on the icon on the top
right corner of any recored ride in the history log.
QUICK ACTIONS
(see image on page 23 for reference)
The lower part of the home screen provides large quick action buttons for common tasks :
PAS level *
Change the pedal assist segment (see page 10 for full pedal assist segment details).
Riding mode
iGO premium eBikes are MULTI CLASS SWITCHABLE through the iGO Ride mobile app.
Select from the list to reset the bike parameters and the selected iGO eBike
will instantly conform to Class 1, Class 2, or Class 3 regulations.
Class 1 : No throttle function, PAS with maximum speed 32km/h (20mph)
Class 2 : Throttle and PAS maximum speed 32km/h (20mph)
Class 3 : Throttle maximum speed 32km/h (20mph), PAS maximum speed 45km/h (28mph)
To engage class 3 the rider can only operate where permitted by local regulations
and accept the liabilities and responsibilities of riding in this class.
ATTENTION : Riding an ebike in class 3 in an area prohibited by law is a punishable offence. It
is the riders responsibility to familiarize themselves regarding these regulations and further
agrees to hold iGO/Fermetco harmless or responsible in any way in the operation of their ebike.
Lights on/off *
Turn on/off any front and rear lights that are directly connected to the iGO Drive system.
Battery info
View current riding and health conditions of the selected iGO ebike’s battery.
Set metric/imperial
Choose to display speed and distance in Km or Miles.
Settings
Password : enter and then confirm a 4 digit code. Once set, this will be required every time
the display unit on the handlebar is powered on before the eBike electrical system will
become operational. Swipe to the left on an active password to access the DELETE button.
Note : as bluetooth functions on the iGO eBike will not be enabled until the password is
correctly entered, deleting the password using the iGO Ride mobile app will not be possible
until a correct password has been entered on the handlebar display unit.
Passwords can also be enabled/disabled using the handlebar display unit.
See page 8 for details.
PLEASE TAKE CARE TO REMEMBER YOUR PASSWORD AND ENSURE THE PASSWORD IS KEPT SAFE
* these settings can also be changed using the handlebar
display unit. See page 7 for details.
FOR APP RELEASE VERSION 1.0.1
