Chapter 4
|
Wireless Settings
Radio Settings
– 48 –
◆
Tx Streams
— Specifies a single stream at 20MHz or a dual stream at 20MHz
and 40MHz for signal transmission. (Options: 1, 2; Default 1)
◆
Rx Streams
— Specifies a single stream at 20MHz or a dual stream at 20MHz
and 40MHz for signal reception. (Options: 1, 2; Default 1)
◆
Tx Power
— Adjusts the power of the radio signals transmitted from the access
point. The higher the transmission power, the farther the transmission range.
Power selection is not just a trade off between coverage area and maximum
supported clients. You also have to ensure that high-power signals do not
interfere with the operation of other radio devices in the service area.
(Default: 17 dBm for 5 GHz radio, 27 dBm for 2.4 GHz radio)
NSS2-MCS5
520 Mbps
256-QAM, double stream
√
NSS2-MCS6
585 Mbps
256-QAM, double stream
√
NSS2-MCS7
650 Mbps
256-QAM, double stream
√
NSS2-MCS8
780 Mbps
256-QAM, double stream
√
NSS2-MCS9
866.7 Mbps
256-QAM, double stream
√
Table 4: Tx Power
Power
Radio 0 (5 GHz)
Radio 1 (2.4 GHz)
0 dBM (1 mW)
√
√
4dBM (2 mW)
√
√
5 dBM (3 mW)
√
√
7 dBM (5 mW)
√
√
8 dBM (6 mW)
√
√
9 dBM (7 mW)
√
√
10 dBM (10 mW)
√
√
11 dBM (12 mW)
√
√
12 dBM (15 mW)
√
√
13 dBM (19 mW)
√
√
14 dBM (25 mW)
√
√
15 dBM (31 mW)
√
√
16 dBM (39 mW)
√
√
17 dBM (50 mW)
√
√
18 dBM (63 mW)
√
19 dBM (79 mW)
√
Table 3: 802.11 Data Rates (Continued)
Option
Rate (Max)
Coding Method
Radio 0 (5 GHz)
Radio 1 (2.4 GHz)
Summary of Contents for SunSpot AC1200
Page 10: ...Tables 10...
