Chapter 3
|
Network Settings
Hotspot Settings
– 34 –
◆
STP
— Enables or disables processing of Spanning Tree Protocol messages.
(Default: Disabled)
◆
UPnP
— Enables or disables Universal Plug-and-Play broadcast messages.
(Default: Disabled)
Hotspot Settings
The Hotspot Settings page can configure Internet access to the general public in
places such as coffee houses, libraries and hospitals. Specific access rights may also
be defined through a RADIUS server.
Figure 25: Hotspot Settings (Network Settings)
The following items are displayed on this page:
◆
Network IP
— Specifies the IP address for the hotspot. Valid IP addresses
consist of four decimal numbers, 0 to 255, separated by periods. (Default:
192.168.182.1)
◆
Network Mask
— Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
◆
DHCP Start
— Starting number of (last numeric field) in address pool.
(Range: 1-254; Default: 10)
◆
DHCP End
— Ending number of (last numeric field) in address pool.
(Range: 1-254; Default: 254)
◆
DHCP Lease Time
— The duration that an IP address is assigned to a DHCP
client. (Range: 600-43200 seconds; Default: 600 seconds)
Summary of Contents for SunSpot AC1200
Page 10: ...Tables 10...
